200W Osram LED high bay
5 years warranty
Meet our 200W UFO led high bay with CHIP OSRAM Duris S5 with 5 years warranty and a useful life of more than 50,000 hours of use.
The performance of this 200W LED high bay allows excellent lighting in medium and high-rise rooms (8/15 meters), where it is intended to achieve high levels of light, with this power we can achieve average luminance Em [lx] up to 1500lx, depending of the number of light points installed.
Do you prefer a LED high bay with higher performance but cheaper?
The LED lighting you need. Save money with our UFO 200W IP65 led high bay with a long period of operation and a 5-year warranty. Designed to illuminate production or storage areas in industrial buildings, shops, exhibition areas, vehicle workshops, etc.
Reducing the price of a LED high bay is easily achieved, you can evaluate the quality of the product that they offer taking into account that the price depends on:
- · Reduce the height of the aluminum body of the 200W LED high bay, making extra-flat luminaires with almost no refrigerator.
- · Place only one COB LED of higher power instead of many LEDs of lower power that transfer heat over the entire surface of the LED high bay.
- · Remove the DRIVER from the led high bay.
Due to these differences in the design and application of the state of the art, in addition to the price, its reliability is also reduced in the medium term, maintaining an adequate level of light with the passage of hours of operation will be compromised. The medium and long-term success of led high bays in industrial buildings and shops require a correct design and implementation of technology. The temperatures in the upper part of the industrial buildings is much higher than the temperature near the ground and this will affect if the led high bay is not designed to manage it. A guarantee of less than five years in the led high bays will hardly allow you to return the costs of your purchase during the "guaranteed" time.
LED HIGH BAY WITH DRIVER! RATIONALIZATION AND INTELLIGENT USE OF ENERGY
The choice of a led high bay with DRIVER is important, there are led high bays that directly supply the LEDS at 230 volts, called driverless led high bays. In systems without drivers, the LEDs are connected in series and directly exposed to a high voltage, the voltage of the electrical network. Systems without drivers produce a flickering in the light (flick) at high frequencies, where the human eye is not able to perceive it, this flickering can cause eye strain. The blinking appears because there is no DRIVER that converts the alternating voltage of your electrical network into a pure direct voltage with a lower voltage. In a led high bay with DRIVER there is a stable voltage and current that will never turn off or flash the LED. A LED high bay with driver will produce a lower harmonic index.
You can rest easy, all our led high bays have a driver to maintain perfect operation of the implemented LED, and they have a control input that you can use if you wish. If you do not want to use this control input, you just have to leave it collected and disconnected, so the LED high bay will emit the light at 100% of its maximum power. But if you want to be able to regulate the light level and electrical consumption they incorporate all the necessary technology so that it can be adjusted using a 1-10Vdc regulator.
The power factor of our led high bays does not penalize you. The power factor not only affects the energy efficiency of the led high bays, and its useful life, it can also affect the amount of the electricity bill you receive. Electric companies apply a cost to this reactive energy when it exceeds certain levels.
In the ITC order 1723/2009 of the BOE, the penalty for reactive energy consumption is contemplated, and it is applied by all electrical distributors.
The 200W high bay LED has the OSRAM Duris S5 LED implemented with a symmetrical light opening of 120º. The symmetrical apertures emit the same light in all directions, this will provide us with a uniformity and light comfort when lighting spaces, far superior to luminaires with more closed angles.
What light level can i get?
UFO 200W Led High bay is a led high bay with the maximum energy rating that can be assigned to "A ++" lighting.
The level of light you will obtain will depend on the size of the area to be illuminated, the height and the separation between them.
A quick way to get an idea of the result I will get is by consulting the tab: Where to use it? You can get an idea of the lighting result you will get:
If you are not sure of the light level Em [lx] required for the area you want to illuminate, you can consult the average illuminance levels required according to EUROPEAN STANDARD EN 12464-1. We have summarized them in a table that you can access by clicking here: : Light levels according to EN 12464-1 .
How can I verify the quality of the 200W LED High bay?
Knowing the efficiency of the LED and downloading your technical sheet directly from the LED manufacturer: Osram, Lumileds, nichia, ect. With a few simple calculations we can get an idea of what they offer us.
All models have been tested in Spanish laboratories, both spectrometry and electromagnetic compatibility are tested. The color temperature, the expected color performance and correct electromagnetic behavior guarantee light comfort and correct coexistence with other electronic equipment. You can check the complete essays in pdf using the tab: Downloads.
- OSRAM Duris S5
- Flujo luminoso
- 26.000 lm
- Eficiencia lumínica
- Número de LEDs
- Protección IP
- Tensión de red
- 100-277V AC
- Factor de potencia
- Durée de vie
- Temperatura de color
- Ángulo de Apertura
- 5 Años
- Ø292 x 199mm
- Rango de temperatura de trabajo
- -30 ~ +50ºC